- Locate the oil fill plug or dipstick on the blower unit. This is typically found on the side of the blower housing or near the drive end of the blower.
- Clean the area around the oil fill plug or dipstick to prevent dirt or debris from getting into the blower unit.
- Check the blower manufacturer’s instructions for the recommended type of oil to use. Use only the recommended oil to avoid damage to the blower.
- Unscrew the oil fill plug or remove the dipstick and set it aside.
- Slowly pour a small amount of oil into the blower unit. Be careful not to overfill the unit as this can cause damage.
- Check the oil level using the dipstick or oil fill plug. The oil level should be between the minimum and maximum markings on the dipstick or oil fill plug.
- If necessary, add more oil until the oil level is within the proper range.
- Screw the oil fill plug back in or replace the dipstick.
- Run the blower for a few minutes to ensure proper oil circulation and check for any leaks.
- Repeat the oil filling process as needed according to the manufacturer’s recommendations.
