Powder conveying blower manufacturer: what is Roots blower
The principle of Roots blower is:The impeller is rotated directly driven by the motor. In the operation of the air convection and pressure difference, the machine gas inhalation and compression (vacuum pump) and then discharged; when the volume of the discharged gas is greater than the entrance of the gas, that is, along the axial direction into the suction chamber again for compression and improve its temperature and air pressure. This repeated cycle to achieve continuous pumping or exhaust process, so as to achieve the purpose of conveying media. Due to the special simple and compact mechanical structure, easy to install, reliable operation and long service life, no wearing parts and easy maintenance and other advantages, and is widely used in chemical fertilizers, food, pharmaceutical, building materials, electric power and other industrial fields. According to different uses can choose explosion-proof type ordinary type and explosion-proof type three types.
Powder conveying blower manufacturers: how to choose the right Roots blower
1、Select the model
(1) Determine the size of the required air volume and the required pressure ratio range
(2) Consider the size of the motor power
(3) Calculate the required rotational speed
(4) Decide the model specifications
(5) Pay attention to the choice of supporting equipment
2、Material requirement of stator and rotor
(1) Made of alloy steel material
(2) Have enough strength
3、Requirements for bearing type
(1) Use high-precision special grease
(2) Fill the bearing holes with grease.
4、Requirements of transmission mode
(1)Gear type
(2) Belt drive
5、Protection level requirements
6、Other requirements
(1)Good sealing performance
(2) Good corrosion resistance performance
Powder conveying blower manufacturers: what are the precautions for purchase
1、Before buying should first understand the technical indicators of the product
Such as flow Q / Hm3 / h, export static pressure P0 / P1MPa, efficiency E2 / η = 1- 0.9, inlet dynamic pressure Pa = 10 - 20Kpa.
2, according to the product samples to provide the parameter value to select
For example: if you need to match the cooling tower, specify the air inlet size D2mm × D3 mm or outlet size D4mm × D5mm, etc.. Should also provide the corresponding piping connection diagram.
3, check the appearance of quality
Including the parts of the damage, deformation and paint peeling and other conditions, such as abnormalities should be promptly notified to the manufacturer to replace parts or return processing. (Note: due to different manufacturers of different production process levels resulting in product quality differences.)
4, test run
Turn on the power switch to start the machine rotation for 2-3 minutes to observe whether there is a murmur or other abnormal phenomena, if there should be immediately shut down for inspection and troubleshooting before restarting the test.
Powder conveying blower manufacturers: Roots fan to pay attention to what matters?
(1)Regular maintenance and repair is required, in order to ensure safety and longevity of service life, it is necessary to regularly clean the filter and other parts to remove dust and dirt to prevent clogging of the filter.
2)Do not overload the filter.
3)Do not stay under high temperature for a long time.
4) Avoid being close to the heat source.
5)Prohibit starting with empty vehicle
6)Strictly prohibit lifting with loads
7)Reverse rotation at high speed is not allowed
8)Do not frequently start and stop the blower
9)When oil leakage is found, it should be repaired in time.
10)Cut off the power supply line when it is not used for a long time.Translated with DeepL.com (free version)
